Optimal and Robust Designs of Step-stress Accelerated Life Testing Experiments for Proportional Hazards Models

Accelerated life testing (ALT) is widely used to obtain reliability information about a product within a limited time frame. The Cox s proportional hazards (PH) model is often utilized for reliability prediction. My master thesis research focuses on designing accelerated life testing experiments for reliability estimation. We consider multiple step-stress ALT plans with censoring. The optimal stress levels and times of changing the stress levels are investigated. We discuss the optimal designs under three optimality criteria. They are D-, A- and Q-optimal designs. We note that the classical designs are optimal only if the model assumed is correct. Due to the nature of prediction made from ALT experimental data, attained under the stress levels higher than the normal condition, extrapolation is encountered. In such case, the assumed model cannot be tested. Therefore, for possible imprecision in the assumed PH model, the method of construction for robust designs is also explored.

Regressive logistic and proportional hazards disease models for within-family analyses of measured genotypes, with application to a CYP17 polymorphism and breast cancer

Various statistical methods have been proposed to evaluate associations between measured genetic variants and disease, including some using family designs. For breast cancer and rare variants, we applied a modified segregation analysis method that uses the population cancer incidence and population-based case families in which a mutation is known to be segregating. Here we extend the method to a common polymorphism, and use a regressive logistic approach to model familial aggregation by conditioning each individual on their mother's breast cancer history. We considered three models: 1) class A regressive logistic model; 2) age-of-onset regressive logistic model; and 3) proportional hazards familial model. Maximum likelihood estimates were calculated using the software MENDEL. We applied these methods to data from the Australian Breast Cancer Family Study on the CYP17 5UTR TC MspA1 polymorphism measured for 1,447 case probands, 787 controls, and 213 relatives of case probands found to have the CC genotype. Breast cancer data for first- and second-degree relatives of case probands were used. The three methods gave consistent estimates. The best-fitting model involved a recessive inheritance, with homozygotes being at an increased risk of 47% (95% CI, 28-68%). The cumulative risk of the disease up to age 70 years was estimated to be 10% or 22% for a CYP17 homozygote whose mother was unaffected or affected, respectively. This analytical approach is well-suited to the data that arise from population-based case-control-family studies, in which cases, controls and relatives are studied, and genotype is measured for some but not all subjects.

SAS macros for point and interval estimation of area under the receiver operating characteristic curve for non-proportional and proportional hazards Weibull models

Aims and objectives  For prediction of risk of cardiovascular end points using survival models the proportional hazards assumption is often not met. Thus, non-proportional hazards models are more appropriate for developing risk prediction equations in such situations. However, computer program for evaluating the prediction performance of such models has been rarely addressed. We therefore developed SAS macro programs for evaluating the discriminative ability of a non-proportional hazards Weibull model developed by Anderson (1991) and that of a proportional hazards Weibull model using the area under receiver operating characteristic (ROC) curve.

Method  Two SAS macro programs for non-proportional hazards Weibull model using Proc NLIN and Proc NLP respectively and model validation using area under ROC curve (with its confidence limits) were written with SAS IML language. A similar SAS macro for proportional hazards Weibull model was also written.

Results  The computer program was applied to data on coronary heart disease incidence for a Framingham population cohort. The five risk factors considered were current smoking, age, blood pressure, cholesterol and obesity. The predictive ability of the non-proportional hazard Weibull model was slightly higher than that of its proportional hazard counterpart. An advantage of SAS Proc NLP in terms of the example provided here is that it provides significance level for the parameter estimates whereas Proc NLIN does not.

Conclusion  The program is very useful for evaluating the predictive performance of non-proportional and proportional hazards Weibull models.

Tests of proportional hazards and proportional odds models for grouped survival data

In this paper, we derive score test statistics to discriminate between proportional hazards and proportional odds models for grouped survival data. These models are embedded within a power family transformation in order to obtain the score tests. In simple cases, some small-sample results are obtained for the score statistics using Monte Carlo simulations. Score statistics have distributions well approximated by the chi-squared distribution. Real examples illustrate the proposed tests.

Choosing between Cox proportional hazards and logistic models for interval-censored data via bootstrap

This work develops a new methodology in order to discriminate models for interval-censored data based on bootstrap residual simulation by observing the deviance difference from one model in relation to another, according to Hinde (1992). Generally, this sort of data can generate a large number of tied observations and, in this case, survival time can be regarded as discrete. Therefore, the Cox proportional hazards model for grouped data (Prentice & Gloeckler, 1978) and the logistic model (Lawless, 1982) can befitted by means of generalized linear models. Whitehead (1989) considered censoring to be an indicative variable with a binomial distribution and fitted the Cox proportional hazards model using complementary log-log as a link function. In addition, a logistic model can be fitted using logit as a link function. The proposed methodology arises as an alternative to the score tests developed by Colosimo et al. (2000), where such models can be obtained for discrete binary data as particular cases from the Aranda-Ordaz distribution asymmetric family. These tests are thus developed with a basis on link functions to generate such a fit. The example that motivates this study was the dataset from an experiment carried out on a flax cultivar planted on four substrata susceptible to the pathogen Fusarium oxysoprum. The response variable, which is the time until blighting, was observed in intervals during 52 days. The results were compared with the model fit and the AIC values.

Assessing time-by-covariate interactions in Cox proportional hazards regression models using cubic spline functions

This dissertation develops and explores the methodology for the use of cubic spline functions in assessing time-by-covariate interactions in Cox proportional hazards regression models. These interactions indicate violations of the proportional hazards assumption of the Cox model. Use of cubic spline functions allows for the investigation of the shape of a possible covariate time-dependence without having to specify a particular functional form. Cubic spline functions yield both a graphical method and a formal test for the proportional hazards assumption as well as a test of the nonlinearity of the time-by-covariate interaction. Five existing methods for assessing violations of the proportional hazards assumption are reviewed and applied along with cubic splines to three well known two-sample datasets. An additional dataset with three covariates is used to explore the use of cubic spline functions in a more general setting. ^

Concordance Probability and Discriminatory Power in Proportional Hazards Regression

The concordance probability is used to evaluate the discriminatory power and the predictive accuracy of nonlinear statistical models. We derive an analytic expression for the concordance probability in the Cox proportional hazards model. The proposed estimator is a function of the regression parameters and the covariate distribution only and does not use the observed event and censoring times. For this reason it is asymptotically unbiased, unlike Harrell's c-index based on informative pairs. The asymptotic distribution of the concordance probability estimate is derived using U-statistic theory and the methodology is applied to a predictive model in lung cancer.

Comparison of a traditional and a multilevel Cox Proportional Hazards model

Hierarchically clustered populations are often encountered in public health research, but the traditional methods used in analyzing this type of data are not always adequate. In the case of survival time data, more appropriate methods have only begun to surface in the last couple of decades. Such methods include multilevel statistical techniques which, although more complicated to implement than traditional methods, are more appropriate. ^ One population that is known to exhibit a hierarchical structure is that of patients who utilize the health care system of the Department of Veterans Affairs where patients are grouped not only by hospital, but also by geographic network (VISN). This project analyzes survival time data sets housed at the Houston Veterans Affairs Medical Center Research Department using two different Cox Proportional Hazards regression models, a traditional model and a multilevel model. VISNs that exhibit significantly higher or lower survival rates than the rest are identified separately for each model. ^ In this particular case, although there are differences in the results of the two models, it is not enough to warrant using the more complex multilevel technique. This is shown by the small estimates of variance associated with levels two and three in the multilevel Cox analysis. Much of the differences that are exhibited in identification of VISNs with high or low survival rates is attributable to computer hardware difficulties rather than to any significant improvements in the model. ^

Effects of informative censoring on the hazard function: Application to the proportional hazards regression model

The standard analyses of survival data involve the assumption that survival and censoring are independent. When censoring and survival are related, the phenomenon is known as informative censoring. This paper examines the effects of an informative censoring assumption on the hazard function and the estimated hazard ratio provided by the Cox model.^ The limiting factor in all analyses of informative censoring is the problem of non-identifiability. Non-identifiability implies that it is impossible to distinguish a situation in which censoring and death are independent from one in which there is dependence. However, it is possible that informative censoring occurs. Examination of the literature indicates how others have approached the problem and covers the relevant theoretical background.^ Three models are examined in detail. The first model uses conditionally independent marginal hazards to obtain the unconditional survival function and hazards. The second model is based on the Gumbel Type A method for combining independent marginal distributions into bivariate distributions using a dependency parameter. Finally, a formulation based on a compartmental model is presented and its results described. For the latter two approaches, the resulting hazard is used in the Cox model in a simulation study.^ The unconditional survival distribution formed from the first model involves dependency, but the crude hazard resulting from this unconditional distribution is identical to the marginal hazard, and inferences based on the hazard are valid. The hazard ratios formed from two distributions following the Gumbel Type A model are biased by a factor dependent on the amount of censoring in the two populations and the strength of the dependency of death and censoring in the two populations. The Cox model estimates this biased hazard ratio. In general, the hazard resulting from the compartmental model is not constant, even if the individual marginal hazards are constant, unless censoring is non-informative. The hazard ratio tends to a specific limit.^ Methods of evaluating situations in which informative censoring is present are described, and the relative utility of the three models examined is discussed. ^

Laboratory and non-laboratory-based risk prevention models for secondary prevention of cardiovascular disease : the LIPID study

Aims : The aims of this study were to examine whether risk prediction models for recurrent cardiovascular disease (CVD) events have prognostic value, and to particularly examine the performance of those models based on non-laboratory data. We also aimed to construct a risk chart based on the risk factors that showed the strongest relationship with CVD.

Methods and results : Cox proportional hazards models were used to calculate a risk score for each recurrent event in a CVD patient who was enrolled in a very large randomized controlled clinical trial. Patients were then classified into groups according to quintiles of their risk score. These risk models were validated by calibration and discrimination analyses based on data from patients recruited in New Zealand for the same study. Non-laboratory-based risk factors, such as age, sex, body mass index, smoking status, angina grade, history of myocardial infarction, revascularization, stroke, diabetes or hypertension and treatment with pravastatin, were found to be significantly associated with the risk of developing a recurrent CVD event. Patients who were classified into the medium and high-risk groups had two-fold and four-fold the risk of developing a CVD event compared with those in the low-risk group, respectively. The risk prediction models also fitted New Zealand data well after recalibration.

Conclusion : A simpler non-laboratory-based risk prediction model performed equally as well as the more comprehensive laboratory-based risk prediction models. The risk chart based on the further simplified Score Model may provide a useful tool for clinical cardiologists to assess an individual patient's risk for recurrent CVD events.

Robust plug-in estimators in proportional scatter models

We address the problem of estimating the principal axes and their size in the case of several populations under the assumption of a proportional model. We propose robust estimators for the common principal axes and their size. The robust estimators are based on asymptotically normal and equivariant robust scatter estimators. The asymptotic distribution of the robust estimators including the proportionality constants are derived. © 2003 Elsevier B.V. All rights reserved.

Additive Hazards Models with Latent Treatment Effectiveness Lag Time

In many clinical trials to evaluate treatment efficacy, it is believed that there may exist latent treatment effectiveness lag times after which medical procedure or chemical compound would be in full effect. In this article, semiparametric regression models are proposed and studied to estimate the treatment effect accounting for such latent lag times. The new models take advantage of the invariance property of the additive hazards model in marginalizing over random effects, so parameters in the models are easy to be estimated and interpreted, while the flexibility without specifying baseline hazard function is kept. Monte Carlo simulation studies demonstrate the appropriateness of the proposed semiparametric estimation procedure. Data collected in the actual randomized clinical trial, which evaluates the effectiveness of biodegradable carmustine polymers for treatment of recurrent brain tumors, are analyzed.

Modeling multilevel sleep transitional data via Poisson log-linear multilevel models

This paper proposes Poisson log-linear multilevel models to investigate population variability in sleep state transition rates. We specifically propose a Bayesian Poisson regression model that is more flexible, scalable to larger studies, and easily fit than other attempts in the literature. We further use hierarchical random effects to account for pairings of individuals and repeated measures within those individuals, as comparing diseased to non-diseased subjects while minimizing bias is of epidemiologic importance. We estimate essentially non-parametric piecewise constant hazards and smooth them, and allow for time varying covariates and segment of the night comparisons. The Bayesian Poisson regression is justified through a re-derivation of a classical algebraic likelihood equivalence of Poisson regression with a log(time) offset and survival regression assuming piecewise constant hazards. This relationship allows us to synthesize two methods currently used to analyze sleep transition phenomena: stratified multi-state proportional hazards models and log-linear models with GEE for transition counts. An example data set from the Sleep Heart Health Study is analyzed.